Command Reference

Get-NetIPConfiguration

PowerShell Networking Beginner Risk: Low

Gnojo Analysis

Understanding Get-NetIPConfiguration

Guided Explanation

What This Command Does

Shows active interfaces with IP addresses, default gateways, and DNS servers.

When to Use It

Use Get-NetIPConfiguration when troubleshooting networking issues and you need information that can help narrow down the cause.

What to Look For

IPv4Address

Current IPv4 address assigned to the interface.

IPv4DefaultGateway

Router used to reach other networks.

DNSServer

Servers used for hostname resolution.

Permissions

Administrator access is not normally required for this command.

Risk and impact

Network addresses may reveal internal network details; review output before sharing.

Typical Next Steps

Continue troubleshooting with one of these related commands:

Get-NetAdapter Test-NetConnection Resolve-DnsName ipconfig

Back to Command Library

Summary

Shows active interfaces with IP addresses, default gateways, and DNS servers.

Syntax

Get-NetIPConfiguration [-InterfaceAlias <String[]>]

Examples

Get-NetIPConfiguration | Select-Object InterfaceAlias, IPv4Address, IPv4DefaultGateway, DNSServer

Displays essential IP settings without modifying them.

Permissions

Administrator required: No

Viewing common IP configuration normally does not require elevation.

Risk and Impact

Risk level: Low

Changes the system: No

Network addresses may reveal internal network details; review output before sharing.

Supported Platforms

Windows 10 Windows 11 Windows Server

Important Output Fields

IPv4Address

Current IPv4 address assigned to the interface.

IPv4DefaultGateway

Router used to reach other networks.

DNSServer

Servers used for hostname resolution.

Common Errors

No matching MSFT_NetIPConfiguration objects found

No interface matched the requested filter.

These Gnojo articles use or explain this command.

Networking Beginner

Inspect Windows Network Configuration with ipconfig

The ipconfig command displays Windows TCP/IP configuration. It can show addresses, subnet masks, default gateways, DNS servers, and DHCP details that help diagnose connectivity problems. Its release, renew, and flush options change network state and should be used only when the symptom justifies them.

View Article

Related Commands

Continue troubleshooting with related diagnostic commands.

PowerShell Beginner

Get-NetAdapter

Lists physical and virtual network adapters, link status, speed, and hardware address.

PowerShell Intermediate

Test-NetConnection

Tests name resolution, reachability, routing, or a specific TCP service port.

PowerShell Intermediate

Resolve-DnsName

Queries DNS and displays the records returned for a hostname or domain.

Command Prompt Beginner

ipconfig

Displays TCP/IP configuration details for Windows network adapters.

Official References